(have a mug o' coffee and turn on your life again.)



Thursday, July 12, 2007 4:47:44 PM A.T.

How can we mix-up both the ball-juice n the colored liquid ? asked a sheikh.
You have to look deep into the matter, and stir ‘em, round n round they shall go for hours and hours, and then, they’ll drown in there, in the liquid, colored.

What are they ?

Mon-gray the small filled in transparent little bags of lemon juice found inside the cut lemon.

Mon-gray. (meaning) LAN-Gray.

You mean gray being number eight, the double holed figure ?
And LAN means dick.

The number eight dicks ? meaning the “gay-ass-holes�.

The Muslims revolving around the dark mass-ive.

Mass and ive means iv e meaning 4 e or DE in short one can simply say DV ? a small mud-lamp just like a small wet pussy ?

From distance it is supposed to look small, but the moment you get near it, it’s massive and huge big ‘anus’ dark black inside, called black-ass the khanna kabba situated in Mecca, the city of Saudi Arabia.
Drink Vomit !
Don’t worry, it tastes like vomit, but is made out of only two consumable items.

why drink vomit ?

to get rid of those spirits, that are clinging onto your living body, for some good food, and better environment.

Are you aware of the fact that at times several spirits start to cling onto your back including yours or the alley cat’s ugly desire to make it up with a living human.

Sometimes even the household lizard won’t leave your brains center “alone�.

Or even your home-fellows might be taking advantage of your being by transferring their ill body ailments towards your brains center or around.

What would you feel right when you’ll start to drink home-made “vomit� ?

Instantaneously, you might hear, thoo thoo, yuck …

What is it ?

Vomit !

I just poured it out from the expired spit pan of my own. I said with-in my own head.

And then the un-desirable spirits, the extra ones simply get their self off of my back, and away from my body.


Recipe !
And the technique to make out the self-prepared vomit.

1. pour about 250 ml. of absolutely cold water into your coffee mug.
2. only one fresh normal size lemon, squeezed into your cold water mug
3. no sugar or other stuff.
4. Nestlé’s Gold Coffee, only just a little more than quarter of a tea-spoon.
5. stir thoroughly, and sip-in with pleasure, knowing that it is home-made good quality vomit that kicks out the “energy sucking spirits�, making you full of stress tiredness and with down-ward mood, and apathy.
6. the freezing lemon gold coffee by nestle shall make your mode enormously full of delight and laughter and you shall be filled with energy, ready to have some Nestlé’s noodles and lots of fresh vegetables.

Remember, someone just said you’ll have to drink the out-put of the BIG-ONE, in there.

And un-educated Saudi-Arabians simply could not understand and built the international toilet in the middle of the desert.

What’s the big one in there ?

Your stomach ! people.

And how can one drink the big-one’s output ?

Its just like one’s vomit coming out of empty stomach.

What’s the method of bringing it out ? sheikh inquired with exceptional possession.

You’ll have to squeeze out a ball or two, into the dark-mass. One Royal replied in angry tone.

She meant, lemons, and the sheikh took it as his own balls within his thighs.

And then the entire world went crazy, mad and like a 45 degree ASS, meaning, 45ASS or in other words, DEASS, or better yet, DVASS, aiming for the dark mass, the khanna kabba, the dark-room in Mecca the Saudi Arabian city, hoping for some holly-water.

Holly-water was supposed to be colored water with reference to Hindu-religious ceremonial practice, called “HOLLY� when colored water is sprayed onto the other than ones self, usually on the ones that ask for it, or the ones that are asked by the ones throwing holly-water (colored-water) to others.

See yourself, what was the original talk, and what religion they made out there in the middle of the desert.


Shahzada adnan majeed

flag objectionable content

(a little literary explanation of why to disable m.b.r.)


Tuesday, July 17, 2007 8:37:30 PM A.T.

Windows-xp with “Bug�

With built-in bug that can lead you to grave yard !

(just the mother board resources)


If you are feeling sick, have to see your doctor often, and are on some medications since, the day you installed windows-xp sp1+sp2, and your computer system has the following hard ware:

One ‘Intel’s’ mother board.
One ‘Intel’s’ processor chip,
with H.T. (hyper threading technology)

You are facing, then, a destructive but (intentional) bug, that has several problems related to it.

Hyper threading technology developed by Intel corporation when employed in one processor chip, does not mean the processor chip has ‘Two Built-in Processors’, but instead it simply has the capacity to work on more than one problems at one given time, that is two separate threads like instruction strings are processed simultaneously making use of the extra high speed of the processor chip to make the computer work faster than otherwise.

In contrast to this, there are certain mother boards (may they be server boards or workstation boards) that do have the capacity for TWO processor chips on one mother board.

That is, two separate processor chip sockets can be seen on one mother board.

Now when you install, the windows-xp operating system on your computers, with only one socket available for processor chip, then the operating system loads in a normal fashion, two drivers for cpu (processor chip). Meaning two separate drivers are loaded onto your computers hard disk to be utilized by the mother board.

This can be seen in the “device manager� tree. Under “system device�.

Apart from other things that usually have to be changed right after the first installation of windows-xp, one odd-bug related to (perhaps) misunderstanding of the hyper technology looks visible with “TWO� mother-board resources driver loaded onto the system.

One can simply say, “Intel corporation warned its proposed customers, at the time of introducing hyper threading products, unless your operating system supports hyper threading components, one may not be able to have a true workable “up to the true hyper threading requirements of a system� hyper threading based system.

In other words one may experience certain problems if the operating system does not explicitly claims to be written for hyper threading technology.

Usage of two identical cpu (processor chip) drivers can be understood, since there are no hyper threading based one cpu driver.

However, usage of TWO ‘motherboard resources’ drivers or set of instructions ‘ as one can claim it to be. Does mean, the actual windows-xp sp1+sp2 does not have the capacity for hyper threading devices.

It was assumed that by ‘system board’ one might say it’s the motherboard, whereas by ‘motherboard resources’ one can say two separate cpu or processor chips are ‘acquiring’ related data from n to the ‘system board’ that can be called equivalent to the mother board.

The above explanation and its usage must be valid for those motherboards that have ‘TWO’ separate cpu chips (processors) on one motherboard.

But in no ‘sense’ can be 100% valid for a hyper threading technology.

One can even say that above statement is true, when you do work with the normally installed windows-xp operating system.

But moment you’ll ‘disable the second ‘mother board’ resources device driver from the ‘Device Manager’

Although your computer still works the same, and even the internet connection works the same.

The person working on the computer starts to see things much clearer and with out some interference from the working machine and other external factors.

The ill-effect of having two motherboard resources device drivers on board means “Your System Is Missing A Second On-Board Processor Chip�.

So it might look odd and funny, but true to its surface, human-brain starts to get attached with the ‘VACANT’ slot for the missing ‘Second’ processor chip, whose socket is not even on your mother board.

Is it a hardware fault ? or operating systems ?

One can silently, ‘disable the lower in the column ‘mother board resources’ device driver.

Bring up the Device Manager, click onto ‘system devices’
Right click on the lower ‘mother-board resources’ , and then, click on ‘properties’.

On the front window that comes up, at the bottom ‘device Usage� has the choice to ‘disable’ this device driver.

Such a provision has be removed from ‘Vista’ along with other capabilities that could make a user of ones own computer re-configure the system for to save ones life when it comes to attacking the computer user.

Shahzada adnan majeed

flag objectionable content

looks like with the new software version for chowk the dirty editor simply did cut-off my important message for those who "donated" the new chowk software.

usually donkeys the kennedy's and the jews the dicks of washington with google in their pocket does the killing where ever they find a vacant country working against them.

well it was about the...
i'll try now on some non-american message board.

i think chowk admins simply are gaging out with the new version in hand.

turn off the extra mother board in your device manager the bottom one

mother board resources
mother board resources (this one) before this i typed the arrow symbol that is on top of the comma and rest of the message got wiped out, as the bug in chowk's software does not know the difference between the user's console and the chowk-admin's console. as the commands should not be entertained from user's console, although the same buttons when used from our side must have some other logical meanings.

moment you'll turn off the second mother board resources by right clicking and then clicking on the properties and at the bottom where there is "Device Usage"

simply turn towards the "disable" and then press 'ok' and restart your system see and feel the difference, if you find it not acceptable due to some reason that won't make a logical sense, then simply turn it on the way you 'disabled' it from the device manager.

its to make the computer person more in controll of his own body and his own mind.

.

flag objectionable content

if your computer has following hardware, then read on:

one intel mother-board
one intel processor chip with H.T. (hyper threading technology)

windows xp operating system.

...

if you do feel sort of sick occasionally, and do feel that something or someone is lurking at your back or on your mind without yourself having the ability to overcome it.

have to hit the doctor's office frequently due to several reasons or perhaps have to take lots of medications.

then its just one click that you'll have to do.
and its reversable.

that is you can always turn it on, or turn it off.

its in your computer's 'device manager' section.

in the device manager window, look for 'system devices list.

and see if your system has loaded

TWO Mother Board resources.

if so, then the bottom one should be 'disabled'

right click on the bottom one

Mother Board resources
Mother Board resources

flag objectionable content

Monday, July 16, 2007 8:11:31 PM A.T.


Kerberos Version5 !

Is your computer, member of an Active Domain ?

Only then you can use Kerberos V5 protocol, as a method of establishing trust between the two computers.

Otherwise utilize (for example) a certificate.

In administrative tools, click on ‘Local Security policy’
And then, click on ‘IP security policies on local computer’

(Server request security….. should be clicked on next.)

Right click, and then click on ‘properties’.

Click on one of the choices on the list in ‘IP filter list’, now click on ‘Edit’, then click on ‘Authentication Methods’.

Click on ‘Edit’, and then onwards, instead of ‘Active Directory Default (Kerberos V5 protocol)’ select, “Use a certificate from this certification authority�

Click on ‘Browse’

Click on one of the certificates in the list, for example, under the ‘Friendly’ column, select the “Japan C…� and then click on ‘view certificate’ and then select the ‘Details’.

From the certificate’s detail one of the purposes of the certificate is “Server Authentication�.

And from this list you can also copy the “thumb print� copy the long string of ‘pair’ of alphanumeric characters with a space between two characters, onto a piece of paper and later in your “Group policy Editor� transfer the same string as it looks in this certificate onto the ‘server authentication ‘ window, as asked in one of the needed empty slits shown in the ‘group policy editor’ tree.

Use the following software to turn on your ‘group policy editor’

‘Tweakui Powertoy for windows xp.msi’

or

‘tweakuipowertoysetup.exe’

You can also copy the certificate as a file by clicking onto the ‘copy to file’ button when looking at ‘detail’ window of the certificate selected.

It is quite possible that Microsoft makes possible to ’revoke’ the selected certificate when it sees a computer running on the internet with a copy of the windows operating system made out from a commonly distributed operating system package, that at the time of sale was allowed to make copies as many needed and utilized.

Then you might try another certificate, and finally you might end up with an American certificate that usually means one has to rely on usa, even if one wouldn’t want to.

You can load more than one certificates at one time on you “Authentication method preference order.� Window.

And then one might face the same old problem of, is this copy of operating system worth 25 bucks or 300,000 bucks? Question.

Shahzada adnan majeed

flag objectionable content

http://www.nod32.com/

this is the website address, and you’ll find, ’free’ computer-bug cleaner softwares avilable from the nod32 website.

you’ll have to down load the entire package of free nod32 bug remover ’zip files’ for example:

AGCSCLEAN.exe
AGCSCLEAN.exe.sig

first make a new folder at some place on your hard disk, and then downl load entire list of zip-files avilable under free bug-remover softwares list.

save them in one seperate folder, and later do, extract files and folders out of them seperately one by one, i give them a numerical number, for each folder with a unique executable and .exe.sig files.

for example the first folder could have a name 00

while the next one could have 01

save the extracted ones at some safe place on your hard disk.

now ’rename’ the files with an extension, ’exe, or exe.sig extra.


rename those files that have an extension exe.sig

use ’.dll’ instead.

now you’ll have quite a few sets of

files with extensions

.exe
.dll

now the big question is where to save these files in and on the windows.

i myself found out that these filters like softwares about ’60 or so in number’ have to be used as ’’ISAPI’’ filters and files.

where to put them ?

there are many place on your computer that can used as a permanent place for the filters to work.

1. you can copy all the files, extracted from the nod32.com site into the following link on your hard disk.
Windows/system32/dllcache

2. another method, click onto administrative tools, and then click onto the ’computer management’

click on services and application, now click on

internet information services.

click on websites.

now click on the ’Default website.’’

in there you’ll find

a tag with the name ’’ISAPI filter’’

put the files downloaded into the ISAPI filter window.

these about 58 or 60 set of files,when properly installed into your computer makes possible that ’bugs’ falling from the live internet connection shall be filtered out and you’ll have a better health, that includes the illnesses related to the ’monthly menupause cycle’ attack from nearby or distant females. and thus shall keep your brains with clear picture of what you’ll be dowing or wanting to accomplish.


shahzada adnan majeed

flag objectionable content

Saturday, October 14, 2006 Atlantic Times

Hard-Disk maintenance.

Unexplainable problems or faults in your computer can arise just because you didn’t clean your hard-disk on time.

For those who do have warranty available from the manufacturer’s people might still face the similar problem, since, the fault that I want to explain might arise within few months from the installation of a brand new hard-disk. The fault’s occurrence depends on the amount of dust particles available in the air surrounding the computer. Since, for such a fault only finest particles have to be there, and fine dust is always there no matter how hard you try to keep the air clean and dust-less. Therefore, usually all of the computer users face this problem every now and then.

There are at least two sections of a hard-disk that needs cleaning on a regular basis, one section is based on the inner-most mechanical section that if taken care of most appropriately usually won’t give up, unless not done this on time. This mechanical section of a hard disk is within a closed environment of a metallic lid that is well kept by using special keyed screws that a lay-man may not be able to open, just because this mechanical section’s cover must not be opened in an ordinary environment, in any given room or place that is.

So, in order to do little maintenance one has to have a place that must comply with absolute dust and chemical free standard. So, that when the lid of that side of the hard disk is removed for at least one reason, and that is lubrication of the mechanically moveable parts. Then, the environment must with a ZERO dust particle standard, to make sure; no such thing could fall inside that section which contains the actual hard-disk or disks and motor movements levers extra. The same theory that used to be valid for those long forgotten musical disks called records made out of either plastic or black stuff that needed a needle to play the song. A smallest of all the dust particle can scratch the surface and would make your hard-disk useless. And there for the mechanical section of the hard disk must not be removed unless it is opened within a closed place that must comply with the standard needed to protect the integrity of the hard-disk. Sometimes people do have a small cabin like room (box) made out of some material to take care of the hard-disks that might be in need of cleaning and lubrication within a given area, it may not be difficult to build a small cabin for such a purpose, unless you are facing just a couple of hard disks of your own. And method used to work in such a cabin that must be air-leakage proof, one might have to first step inside a bath room and then walk directly inside that cabin all wet to prevent the dust and other body dead or alive cells to have the ability to get into the hard disk and ruin it. The oil and the amount of oil used for any given model of hard-disks have to fall within a given standards, so that it may not ruin the machine. This information may not be available from some place other than the hard-disk manufacturers or people alike.




Other section of the hard-disk that needs cleaning usually is under the electronic circuit plate. That also can be removed using a special keyed screw driver having a shape that might be needed to match the size and shape of the screws.

If you are not sure which of the two sides of your hard disk has an electronic circuit plate inside, that you would want to remove for cleaning, and then you must not attempt to remove either of the two sides. To overcome this, manufacturers now simply do not cover the electronic side of the hard-disk, so that one may not accidentally unscrew the side which might expose the mechanical section of the machine, that you might make use-less just even if the lid is un-tightened.

You have to have a screw-driver shaped L-Key style instrument that is needed to remove the electronic circuit plate. For that, the size and the shapes do vary, and different manufacturers of these screw drivers may have a slightly deviated size made out with different shapes available. They usually come in sizes written like for example, T9 extra. One must first try different makes of the screw drivers. The plastic container that comes with the hard-disk is considered a must when you would go out for search of a needed L-Key style screw driver with exact shape and size, for protection. The screw driver styled L-key tool has to fit very tight inside the star shaped screw head to prevent the damage that might be a result of a loose fitted screw driver tool, if this tool fits loose inside the screw heads, in due course can make the screws use less before the actual hard disk would become faulty altogether.

The faults that are the result of this problem cannot be removed with usual changing of the hard-disk cables that normally are not the reason of those faults. And when one starts to change the hard-disk cables frequently it simply starts to remove and thin-out the gold-plated points electroplated on the side of the hard-disk where you insert the cable connectors. So, if a hard-disk related problem arises, do clean the circuit plate (if you can) as explained below. Or should refer to a qualified person in case the warranty is not there or if a person feels the warranty people are not qualified enough, and might either destroy your data, or if you want to keep things secret that are on your hard disk.

1. Remove the hard-disk from the computer casing and while doing this work under a strong light while placing the hard-disk on a flat surface, a table would be fine. Unscrew the electronic circuit plate, by removing the screws, and making sure, during this time YOU MUST NOT TOUCH the electronic parts or there exposed pins and surface extra. The reason for this is that the technology used to build such electronic circuits is based on such a principle that the weakest of all static charge that every person emits from within, can effectively burn out the inner gates of the electronic circuits that are the basic building blocks of the chips soldered onto the circuit plate. Usually one must also wear a wrist band used to earth the electrostatic charge developed within ones body. (As a safety precaution). These wrist bands are available from electronic shops, and do come in various makes, that do have sometimes faults in them as far as there continuity is concerned from ones wrist to the common ground of the circuit plate one has to hold in hand.
2. When you’ll see the under side of this circuit plate the situation would become evident and usually even if one does not believe in would instantly say “O my God” … do I live in such a polluted environment ? “Look at that ...”
3. You’ll need few things to clean your circuit plate under side points.
(a) A bulk of Alcohol swabs (as you’ll need these for cleaning of your computer things other than the hard-disk) available from your pharmacy. Used for cleaning skin before one gets an injection. Usually water is mixed in the alcohol used in these swabs; some manufacturers also make them with 100% alcohol that has a plus point, since they won’t leave specs. Of water the moment alcohol is evaporated. For that one has to wait a little longer until the water drops are evaporated. Or, you may also, use 100% isopropyl alcohol, readily available from some thrifty stores. (Although, I won’t recommend these as far as there purity of contents is concerned, since if not pure isopropyl alcohol and if some other chemical is mixed within them then it could play havoc with your machines integrity. Swabs used by nurses are on the other hand safe as they have to be rubbed on a human skin.
(b) A can of 100% no residue left type of spray cleaner that is usually needed to give a final (wash out) to the circuit plates both sides, making sure you won’t drop the dripping liquid onto the hard-disk itself. Philips Company makes a degreaser cleaner that comes in a light blue can suitable for this purpose. Although, just a little might be needed to clean the surface of the electronic plate of your hard disk, you might use the entire can, if you know how to clean the processor chip and other sections of your computer by your self, within a year.
(c) Cotton buds that are used to clean ones ears (I suppose).


4. The circuit plate has a set of points on the hidden side of it, which does come in contact with the exposed points on the hard-disk side. These points must not be scratched with an abrasive, since, this cleaning job might be needed several times during the life of a hard-disk, there for some other methods of cleaning must be employed, for example, a softest of all and with out any abrasives in it, since there usually is some sort of sand particles mixed with certain rubbers used as an eraser. Therefore, the choice of an eraser (rubber) would be a best idea. However, there are other methods to make these points, look clean and work with zero resistance, if coated with such a method that would make these exposed points (the circuit plate side only and not the hard disk side) coated with shiny silver metal. Such chemicals are sometimes explained and sold by the electronic or other shops, but a little expensive when seen by a Do-It-Yourself type of people. (Silver Nitrate for example), Although, after such a cleaning your hard-disk, provided it only needed cleaning, shall start to work normally, and can be checked by some soft wares as far as its working is concerned, software with “Active S.M.A.R.T.” Type of routine as available in some of the computers hard-disk section of BIOS settings and using other commercial soft wares one can see the difference of % of faults occurrence before and after the cleaning of electronic points.

5. Under the electronic circuit plate is hidden a small and thin soft packing for protection, a must be used as placed. Cotton buds can be used for individual cleaning of these points that come in contact with the hard-disk inside electronics.

This cleaning process should be done on a regular basis, depending on the results of the software like for example, (Active Smart)-(http://www.ariolic.com). That should be loaded onto your system for hard-disk look after.

This cleaning job would prevent changing of hard-disk cables, that when changed on arousal of a fault in your computer, when moved, sometimes makes these points that do become dirty, to touch where they normally are supposed to, and dust would be preventing this, one starts to think cable was the cause of the fault, which then again shows up after little time.



Shahzada adnan majeed

Email address: prisms_inverted@yahoo.com

(Space represents an under-root)

flag objectionable content

perhaps a little check on your computers configuration that could have altered by someone other than the one who has right to do that. the dirty name says it all, if it is not being done ahead of time by windows, and state of pakistan had a person by that name for altering your computers configs.

1. click on administrative tools.
2. and inthere, the ’computer management.
3. click on ’services and applications.’
4. click on ’internet information services’
5. right-click on ’internet information services’
6. click on ’’all-tasks’’ and then on ’’back-up/restore configurations.

(7) do you see something like this ’’iischema’’ ???

there it is for you to delete or to keep.

i simply make those people feel ashamed infront of the entire world, when they try to have a sneek on my babe, my computer, that is. perhaps you might be able to forgive the name chema ... it is impossible to forgive this name, even if it shows up as being the ’’schema’’
.

flag objectionable content

Friday, July 06, 2007 11:59:58 AM atlantic gmt

Cause of Dingi-Virus, with the help of certain chemicals, including alcohol, that is mixed with commercial food products, like halla and haleeb yogurts, country fruit juices, regular white sugar, salt and soda-bicarbonate supplied to clay oven shops, with chemicals, added as decided by those, who want to lower the population growth at large.
Cause of kidney desease and liver jaundice are also because of the just explained reasons, as well as the ’’Edible-Gum’’ used in many renowed food processing company’s packed food products.


Re-Birth Of Computer Users

Computer users are more vulnerable to re-birth by another living human beings, than the non-computer users


When you use the available from the market windows-xp operating system on your computer, you become an easy target for the western countries, especially the American continent for being as easy pray for the oven, or grave, also a quite healthy subject for the doctors on the go.

As I explained earlier, the method of lay out of the windows-xp operating system is such that no matter who the person may be, can be programmed to go crazy or wild and thus become an easy target for doctors prescriptions, and within the world of pharmaceutical companies, there are drugs that can make a person loose it’s brains without a specific reason, except becoming just another target for the re-birth within another person.

Within the windows and within many different soft wares there are different color slides like figures, that are used by different software routines for making (as they say) good use of your memory.

Such different color shields usually make different sections of human memory.

And as majority of the people know, it actually depends on one’s “Concentration” if we use our own head or not, and on that if we are using the entire memory of our head located above.

So if there is certain section of human memory that is blocked from one’s concentration and is being put to use by other than ones own self, usually that section is taken over by the spiritual side of life, with the ability to transfer the similar “separated” section of human memory from some uneducated or some other mentally retarded or even from some actual mad-house patients.

Such a transfer is done using the parallel side of our planet and matter.

Human generated anti-bodies are directed towards the pray (a computer user or someone living within the vicinity of a computer user, and since now there are “canopy” style of wireless technology available, that does have the immense effect on the people living within the wireless canopy, apart from the regularly being nearby a computer.

On several occasions when I did changed few “Black Color” monitor shield graphic figures, as can be seen in the following files

Winnt.bmp
Winnt256.bmp

These names are just a little hint, where as there are many different other similar files with different colors, some even with just very lightly legible writings.

When you use your computer with such files loaded onto your system, then these (above mentioned and alike) picture shots simply divides your brain and its memory and makes your concentration reverted towards just part of your entire brain at one given time, although some people might say, brain does not have concentration alike at all given points of the brain at one given time.

But in this case, things are different, when the place you keep your machine running (computer that is) gets attention of the parallel side, and it then simply makes your body and brain hold extra spirits, of the dead ones, from some authentic place, and thus makes ones brains, a living place for the spirits of the dead ones, and since the concentration of our brain is limited because of the division that takes place because of the usage of different files with similar usage as the two files above, then the sections of ones brains where there is no visible concentration from within due to the separation done by using the picture shots as in winnt and winnt256 file and similar ones, then the attack from the dead graves start to fall on that section of the brain. And thus makes a person loose his or hers ability to have a true 100 percent functional body parts. Just one reason of the paralysis and similar other destructive problems, that can fall on ones body from the dead ones.

If however one is clever enough to understand how to do what to do and what type of configurations and picture shots extra should be utilized then people sitting on some real job and others too do get their hands on the entire memory tracks of even the living ones rather than only the dead ones spirits.

What a criminal way to place picture shots in an operating and other software’s system.


Shahzada adnan majeed
Prisms_inverted@yahoo.com

and yet, the new Vista operating system makes a person with deep low mood.

flag objectionable content

Thursday, 05 July 2007 3:14:10 AM atlanticgmt

(wanna see the distant visuals with out the electronic cams ?)

Beyond The Bug !!!

By now, you must be aware of the infrared-mouse (as altered by the method described earlier).

Following method can take you in colour right inside the other person normal day to day (and night time also) life.

Simply change the tail light of the infra-red mouse’s LED from (as previously put to blue LED) blue to ultra-violet LED. (as used by dentists to expose the denture settings or fillings extra.

Also, these ultra-violet LED’s are used to identify the U.M.Z on currency notes.

Ultra-Mark-Z

Moment you’ll turn on your computer after making the above change, even if you’ll turn on a one sided communication device, and if there is a living person on the other end, you’ll hear her ass and also, have her direct total memory access.

As the “natural-bugs” that are most of the times seen around your living places, do have the same ability to transmit the visuals to some distant person, with ability and interests. As long as the little bug or bugs do have eyes that should be sensitive to some frequency of the light spectrum.

So, its better to have it done by your own self rather than asking someone else.

Please do remember, the base of your infra-red mouse device must also have an infra-red LED as the bouncer light source to run the mouse.

Infra-red mouse with ultra-violet LED soldered into it, can also, make your body “infection-less”.

Shahzada adnan majeed
Prisms_inverted@yahoo.com



When you have the above set-up, there always is a little danger of getting ruined by the excessive ultra-violet light, but if you’ll have a switch with it, you’ll be able to have a visual peek at many distant people’s living quarters, simply by closing your eye lids for a while.

flag objectionable content

Monday, October 02, 2006 Atlantic Time

(for those who don’t like to throw away their mouse every now n then)

A4Tech - & - Other Brands of Infrared Mouse.

Probably the easiest to handle and one of the most modern designs when we talk about a hand held mouse as an input device of a computer. (Please note, that wireless mouse, can never be recommended as it can cause radiation illness, regardless of the fact that it has a weak R.F. oscillator in it.)

Although, not too many, problems were encountered, while using the swop-35 optical mouse, by A4Tech. Except of course the click switches soldered inside the mouse with occasional corroded points.

This of course had to be changed, several times, with dime worth of switch readily available from electronic shops. The reason, perhaps, what causes this must be wrong selection, of some passive components, used with an A4tech integrated circuit utilized in these types of mouse devices. Non availability of the I.C. specification was an excuse to find the specific part that might not be suitable for the device.

Some thing else became the reason of concern while using optical mouse that has two LEDs inside the mouse used as a source of infrared light. One of the LED’s is primarily used for as a source of infrared while the other one is used as an indicator right at the end of the mouse that emits red light coming out of a transparent but blue in color plastic casing of the device, color bluish violet of the plastic casing probably was chosen as a filter and suppressor of infrared light coming from within the mouse casing.

For the past couple of years I have been using this mouse and am still using it, but now things have changed a bit, since, I have changed both LEDs with those of my own selection, the LED used as a source of infrared although must be an infrared LED, also has red visible light as an indicator of the integrity of the LED.

So I changed this LED that is of the same size and transparent like the original one, with the one that is only emitting infrared light, to cut out the visible red light coming out of the mouse casing.

Also, I changed the color of the LED used as an indicator and instead of a red LED, now I have a strong blue light emitting LED that instantly has a positive effect on my blood pressure as well as my concentration and mood.

Since the LED’s emit, single chroma light, therefore it won’t be difficult to say they are almost near to laser light source, of course with very little power. Also, because the indicator LED of an optical mouse simply keeps turning on with strong light emission and weak light emission at those times when the mouse is at rest. Also since there may not be other sources of such a uni-color light, around that place where you might be working, other than the power light and the HDD light of one’s computer, keyboard and monitor etc, and since the manufacturer has selected the red LEDs, therefore, I after many months thought why not change the color, from red to blue. And after changing these two LEDs I found out that blue color itself brings in some strange but interesting visual displays, when after working I would try to rest a bit and would close my eyes for sometime. The visual displays although were of light blue in color, were totally, sex act based, and were self created, that is such a display could not have been derived from some other sex act movie or shots, either from same room, or from some other covered area, some where around.

Why does blue light keeps a human mind under severe control and makes the person do things with much more concentration then one might be able to achieve with a doctors prescription of some tranquilizer and/or mood altering medicine. I still remember when my mom would bring out a small plastic glass like tumbler for drinking water or other drinks, when ever I would feel depressed, and would say, that your dad used to keep this blue colored transparent like glass inside his four wheeler, saying blue color light keeps human mind relaxed, and water when kept in there for long period of time keeps people under control, (this however, used to be excessively achieved by my mother, by putting some poisonous drug in the tumbler to make sure, one may not be able to achieve sexual satisfaction no matter what?)

The red colored light on the other hand makes one feel sort of afraid of those images that one does receive from adjacent and distant places, that are not only displayed in the room with multi-dimension effects (without some electronic device turned on), and eyes closed, but also it then makes a direct audio visual exchange with those opposite gender people who might be wanting to have a real physically felt able contact with live feelings and exchange of body odors and feeling of wetness and heat and coldness just like it would be if they were in here, but in fact are at some other place. (A strong statement it looks like but not that tough to beat.)

By changing the color, from red LED to a Blue LED (and an exclusively infrared light emitting LED.) it was possible to actually communicate with in both visuals and feelings that could be seen when I would close my eyes, and visualize what was going on with certain people. Also, blue colored display would create visual displays according to the need of the mind, and would make both the blood pressure and mood in most controlled limits.

Please note, one may feel excessively cool minded because of the above reasons, therefore for those who can handle this, may install a two colored LED one of blue and other color being red, and also, install a small click on click off switch inside the optical mouse, with a very small hole drilled onto the casing of the mouse at some appropriate place, so that the color of the indicator LED could be changed according to the need and mood of one’s own self using a small common-pin like object to click on either of the two colors of LED while working on a computer installed at a permanent place rather than being on the run.

Someone at this time might say why not have couple of LEDs of the desired color turned on in the same room, rather than having mouse with them? Well, the light that comes out of the end of ones mouse, is usually, taken up by the end of the hand or one’s wrist, and thus have an impact on the body with direct contact, while working with a computer, and therefore is different from having a small lamp like structure with different colored LEDs for similar purpose.

Optical mouse like the one mentioned has three capacitors in it that keeps the timing for couple of effects of the mouse. If by some reason these capacitors have to be changed, because the electrolytic capacitors usually happen to have their value of capacitance changed from their respective values to some other value, that might become a reason for the electronic device to malfunction. (as they got switched around when I replaced them from electrolytic to tantalum capacitors, made it tough to control the cursor as the timing of turning the mouse on and turning it off for rest and the one needed to keep the wave form for the bounce effect of the pulses that come out of the mouse, to hit the surface, one moves the mouse on and enters into a pin-hole receptor got altered and therefore mouse was not working with 100% accuracy. This happened since all three capacitors were of the same size and I simply (although knew about this) forgot to keep an eye on them and later found out from common sense that I must have switched them around or there is no reason to believe the mouse should start to malfunction.

Choice of the mouse pad or the surface color and texture of the mouse pad, also have lots of effect on the working of the optical mouse. As with pure infrared light emitting LED, the mouse pads color and texture has to be selected with little experiment and interest.

Anyone want to try that change?

For some time, since I changed the source infrared LED, the mouse won’t work properly, and after little thought I found out its focal length has been altered, that is the distance of the core of the LED, from where the light is emitted, to the point in the pin-hole infrared light receptor, the length or the distance the light waves have to cover, has either decreased or increased. As when I would slightly raise the mouse above the pad, it would start to work normally. Now, the only BEST method of curing this fault is to try couple of other similar LEDs with their center core, from where the light is emitted, slightly implanted near to the front end of the LED, or nearer to the back end of the infrared light emitting LED. Depending on the fact, if the focal length has been increased or decreased..

Other methods would be to either push the LED towards the front from behind by pushing it with a very small hard plastic screw driver, or by pushing the LED towards the end of it from the front.

Also, the receptor with a little pin-hole in it can also be either pushed down or pulled upwards with great care as it is a sensitive device.

One other method of correcting the focal length is by using a paper packing (sort of) piece in between the wedge lens used at the bottom of the mouse, of course from the inside, underneath the lens wedge assembly, this would increase the distance light covers from infrared LED to its receptor, and shall correct the problem.

The small plastic pads pasted at the bottom of the mouse can also become thin with excessive use or after usage for long periods, and can be corrected as far as their thickness is concerned, with a new set of scotch tape gum like substance that can be used from a double sided drafting tape pasted either at the back of the same pads, if the sticking side would become use-less, or on a new set of pads (feet’s of the mouse) that can be cut from a thin polyethylene piece of plastic with similar thickness, sometimes seen in the form of old Molex connectors as used for ATX power supply plugs in your computer seen hanging with the drives made usually for four pins.

Other than blue light emitting diodes, like for example the violet colored ones that emit violet light with a transparent body, or yellow, or better yet a pure white light LED with transparent body, that would have a small elongated lens in front for sharp spot that is well taken by the human brain as a display source for creating images within the brain, either depending on your imaginations or on the pictures and movies that you might be having on your hard disk. Strong coffee, or a brewed out mug of delicious tea usually is needed without the need of some harmful drugs of some sort.

(A little word about those rubber wheels that are made out of bad quality of rubber, which after little usage sucks in oil from within ones hand and finger, regardless of the fact that their might not be any oil on the finger. The best way is to clean the wheel assembly with some soapy water made out from dissolving little amount of bleach less detergent powder, and making sure that the assembly may have a touch of a (silicon based grease used in automobiles (STP) has it in strawberry color, as it won’t melt in summers, making sure it should only be applied at those spots where it is touching the other part when moved., the rubber wheel can stay in soapy water for fifteen minutes and then washed out several times in water poured in a small container.)


By
Shahzada adnan majeed
Email address: prisms_ inverted @yahoo.com

flag objectionable content

while i re-configure my four partition machine with vista on one, and three windows xp-sp1 + sp2 + vista inspirata (then delete it as it has too many fax and other connecting routines, and built in bugs, what is left is just another look) + 32 bit wndows to make life easier as one might be able to live without viruses for little time.

three different messages i’ll upload.

this message shall have some details about how to increase your ability to have more concentration on your computer work and other studies, by preparing just a simple dish that you’ll love to have.

.Thursday, July 05, 2007 3:07:34 AM atlantic time


A Royal To A Royal !

‘you’ll have to enlighten your snake-ends with bulbs.’

And

Saudi Arabia constructed what this world has, the “Allah”
As can be seen. Millions make a moc. Out of their own selves, by praying in some odd fashion.

What actually someone wanted to say was, as follows.

The menu for those who do need to get rid of those medications.

A vegetable juice (or) extract it was made out of a type of “Raphanus Sativus” called “Daikon” or the “Moole” or “Maule” a common name of muslim preachers belonging to an odd religion of Saudi Arabia.

Explains, how people make the entire world fall for something that has no logic. A simple case of making millions of people fall for the ugly-un-educated version of “Daikon” or “Raphanus Sativus”.

Raphanus actually is in reality constructed on one corner of Khanna Kabba, the center house of Mecca, of Saudi Arabia.

Rapha Nus. Nus means the tube, and Rapha means from where the excretions or the expired outcome is delivered out.

The God of Saudi Arabia has the Raphanus, the “Anus-Hole” as carved on one side of khanna kabba built at the meccan city.

“Can you believe where “THEY” have taken us ?”

Raphanus Sativus when Reversed …

Comes out to be Suvitas Sunahpar

The second word means “Sunah par”

Meaning namaz par, or in other words, pray like the muslims pray at meccan room, called khana kabba.

Illogical it is, the religion Islam ? true or false ???

“The Raw Cube”
as muslims raise their bulbs a hundred times per twenty four hours !


have the feast at least three times a day !

1. either boil two cups of rice from a recent drop, wash them out under running water, and make one vertical cut on three green chilies when you’ll put the rice for first, to be boiled for a minute or so, and then to be simmered for ten to fifteen minutes at slow flame.

2. or first peel, and make about one centimeter cubes like shapes of a large size potato, and boil these in some water for good fifteen minutes.

3. it should be your choice to use either the rice about two cups of raw-rice, or one large size potato as prepared.

4. maggi 2 minute noodles, one sachet, boil a little over two and a half cups of water, also pour in either of the above number 1. or number 2. into the pan with water to be boiled, at boiling point, drop in the noodle cake whole or broken into four pieces. After three to four minutes add the spices-n-flavors as supplied in the maggi noodles. (other brands don’t have what it takes to kick out the near-by muslim hub’s attack on your nerves.)

5. also, you’ll have to prepare the followings:




a. make about one centimeter size of cubes like shapes of a large size tomatoes.
b. Also, make similar size n shape of a quarter of green-pepper, or bell-pepper.
c. Make cubes about one centimeter size of a medium size cucumber.
d. White root, one medium size, make one centimeter size of cubes after peeling of the skin.
e. Salad washed out with clean water and chopped down into small leaves.
f. One medium size raw onion preferably violet in color, peel off, and carefully make about one centimeter size of squares and similar shapes.

After you prepare the noodles, either with pre-boiled rice or pre-boiled potato cubes, pour on top of the heap of salad cubes and squares as placed in a large dish

On the above serving for one healthy person, squeeze out at least three to four lemons on the noodle-cube mount.

A light sprinkle of black pepper powder, with out some additional salt or other spices shall make things more digestive.

A serious question, what should be the liquid vehicle to gulp down the above mass ?

Home-made lemonade.

In one litre of cool water, squeeze four lemons very carefully to make possible for the entire lemon to give out all of its juice.
Add four to six tea-spoons of non-drug-tainted white sugar.
Sprinkle some powdered black pepper, and stir the lemonade until the sugar dissolves.

When you feel like, you may add two farm-house chicken eggs in the noodles while they are on the flame, or a scoop of previously boiled out fish meat, chicken meat, or some other ox, or cow’s grounded beef as an added taste and nutritional need.


If you’ll consume the above at least two time per day as your meal, the illnesses and medications shall be withdrawn from your life, and that includes the ill attack of stomach problems, as well as weakness that might have been making you to take vitamins or multi-vitamin medications.

A word of caution !!!

You must not consume oil, butter, or other shortenings of whatever type you might be thinking of.

Instead of tea, I would suggest the following:

Use Nestlé’s gold-coffee and regular widely used coffee, each about quarter to half of the tea-spoon. Add Nestlé’s “nes-vite” milk in the making of your cup of coffees. Couple of tea-spoons of white sugar usually makes ones coffee sweet enough !

Only regular chicken flavor should be consumed as the flavor enhancing spices in there are suitable for daily consumption.

Shahzada adnan majeed
prisms_inverted@yahoo.com


please note: you must not use regular bread, or vinegar added things in your meals.


………………… ;…………………… 230;…………………… ……………………R 30;..

flag objectionable content

i’ll try to write down in explainable details how to configure your machine for only ’’ICMP’’ from within the administrative tools or from Group Policy Editor. but for now, the following might make life expectancy of your system longer than others.

.
Wednesday, June 27, 2007 9:58:37 PM GMT Time.


A word of CAUTION for computer users.

(Power - Protectors)


The under/over voltage sensing device and/or built-in circuits in your automatic voltage regulators (if there are in there), must be re-adjusted right after you purchase them (even if its absolutely brand new.)

Why is it a must to protect your computers from high and low voltage surge(s)? As everyone knows computers are not supposed to have mechanical movements, (except of course the cooling fans installed in there.) Therefore, must be protected from the troubles caused by the everlasting negligence done by your power company.

Mechanical movements can withstand voltage fluctuations up to a certain limits and for a specific time (at one given time) … and therefore may not get ruined immediately.

The electronic components on the other hand must be protected from surges or other voltage problems (that does include the frequency fluctuation in the mains power supply coming from electric company. Perhaps that’s one of the reasons that ATX style power supply had to be there, (the switching power supply.)

So the over/under voltage devices that must be there ahead of a given unit attached with your computer, may that unit be a U.P.S. unit and/or an Automatic Voltage Regulator. The later is considered necessary (even if the maximum/minimum input voltage that your U.P.S. or your computer can take has a broad-band. (meaning the range of over and under voltage accepted by your first input device connected with your computer and other related devices must be capable of handling (un-expected voltage problems.) and even if they can there has to be a regulator just for the sake of it.

The problem with under/over voltage sensing devices is that since they have to be adjusted for the minimum and maximum voltage range, and since they are adjusted at the factory to some unknown voltages, that according to the manufacturer might be considered the right-range, may not be what your computer or other related devices could take.

Therefore one has to first see the input of the first device connected with the mains power-supply cable, always there has to be the maximum/minimum voltage indicated at some place on the Automatic Voltage Regulator/U.P.S. units. Say for example the minimum voltage that you’re A.V.R. can withstand is (in those areas where the supply voltage is 220/230/240 volts) 190 volts. And the maximum voltage it could take is 250 volts. Then the device used for sensing over voltage must if actual simply should cut-out the mains supply when voltage goes up to 250 volts. If it is adjusted to 260 or 270 or some other voltage range then it must be re-adjusted according to your units maximum input voltage.
Similarly if the minimum voltage that the unit can withstand is say for example 190 volts then the over/under voltage sensor must be adjusted to this minimum voltage range. Otherwise it would be useless to have such a device connected with your first mains power input.

The second place where you have to have such a device/circuit is right at that point where the mains power is connected with the actual computer/monitor/printer and other devices.

Since, all these units have to be connected from the same power out-put socket, therefore this device (under/over voltage device) must be adjusted according to the maximum/minimum voltage as indicated on the manufacturers labels attached at some place on your machines.

An example, since the monitor I have can handle only minimum of 220 and maximum of 240 volts. And since the computer’s ATX power supply can and must be supplied 230 volts (as described by the ATX power supply specification available from ATX websites) Therefore, the nominal mains power supply I needed was 230 volts, as it is the mid-range for the monitor and the optimal range for the Computer’s ATX power input.

So I had to adjust the maximum votage at which the voltage sensing device should cut-out the mains supply going direct into the computer at 240 volts. And the minimum voltage had to be the lowest possible; I adjusted it for a 200 volts mark.

Why is it that minimum voltage has to be adjusted at the lowest possible that your computer can handle, or even lower than that? When you turn on your monitor and computer at the same time, along with your printer(s) … there is a heavy voltage dip at your mains power line. Therefore in order to make this dip of voltage acceptable the minimum voltage adjusted on the voltage sensing device must be lower than the voltages accepted by your machines.

A word about your ATX power supply. In order to avoid the power dips and surges the ATX power supply as contained inside a metallic box must have couple of power capacitors able to handle the maximum voltage that might erupt because of some trouble and must also be of a value (in micro-farads) that could with stand power dips on the line that might occur at some point making you computer go into a state when it is halted and start to do things that it should not do.

An easy method of saying how much should be the value of these capacitors is just by looking at the stand-by LED indicator that is usually on your mother board giving out a small light indication. This LED light indicator after you’ll turn of the computer must remain on for at least (THREE) seconds. Then one can say your machine may not experience the troubles caused by power dips.

Why is it the most important device connected with your computer system ?

Some people might not be aware of this fact that those U.P.S. units that have a data cable connected with your computer to control the U.P.S. from a software installed in your hard disk, are the most vulnerable to the attacks of MSN and similar other companys running their business on the life of your computers. (As can be seen in the ‘power options’ window of your windows xp.)

The method they use is to send a cookie or a small executable program from the internet which at a certain time simply might play a havoc with your UPS making it to burn your machines.

The only method of protecting your system from such an attack is by connecting an over/under voltage sensing device/circuit right at that spot where power enters your computer system, that would immediately detect the voltage variations and would either turn off or turn on your entire system accordingly simply to make sure it should last longer then expected.

Although I have written in detail about the power supply for your computer systems, but a little suggestion for those who do care for their BIG machines, have your Intel mother boards equipped with a minimum of 400+ Watts power supply of some renowned company’s, and if your machine has more than two processor chips on board, then, I would suggest you must consider the 500+ Watts power supply for your machines. As long as the air-circulation remains properly managed, so as not to block the air-flow from within and around the computer’s casing and the adjoining area, where you have your computer placed.

Written by: shahzada adnan majeed
e-mail: prisms_inverted@yahoo.com

flag objectionable content

Monday, June 25, 2007 Atlantic Times




Is your face turning Black Gray or Dark Gray?



CRT (cathode ray tube) monitors are probably the only ones in the market that still have the ability to display extremely fast displays, at least faster than the LCD display monitors can.


But there are many negative points related to CRT monitors. And one of them is excessive radiation that constantly is emitted from all around of the picture tube of your monitor. This radiation is usually composed of X-Rays … that are emitted when electron beam is made to strike a metal surface that in turn emits X-rays, having the capability of passing through the human body and other materials with ease, that depends on the materials molecular structure, if, it is sort of thick or thin. Bones act as a resistance on the flow of X-rays where as flesh is easy for X-rays to pass through. There is usually thin gauze like metal sheet just behind the front of your computer monitor or TV.

Normally, it is said that your Radium coated wrist watch or table alarm clock emits more dangerous radiation than the picture tube of your television set. But in the case of a TV set, one sits in front at a distance of about 1/8th the size of the TV sets picture tube, therefore cannot be harmed by its harmful X-ray radiation.

The computer monitor we sit in front at a distance not more than 24 inches. Also, since is colored picture tube just like a television set’s picture tube, emits enormous amount of X-ray radiation that in turn effectively starts to have negative effect on human body skin and surroundings.

One bad thing about sitting in front of a computer monitor (CRT) type is that the computer user’s facial skin as well as the skin of the hands and chest starts to turn Black dark gray or grayish in tone and color. There could be many reasons that might be explanations of this bad effect, but if one would know that while sitting in front of a computer monitor one is facing heavy bombardment of electronic cloud like formations that excessively do come out of the front of the monitors screen and thus charge up the human body that is facing the monitor.

How to protect you from this is not that difficult, but usually one does not follow the correct method thus still the effort to protect the computer user is wasted.

A separate Glass screen that has to be placed in front of the CRT monitor is what is needed to protect against the constant flash out of electronic charge that strikes the face and other parts of your body. The glass screen has to be of a color that must be able to neutralize the negative effect of color sharpness that sometimes is not understood when one keeps on argumentative discussions about the not needed extra front screen of your CRT monitor.

Even if people do hang a separate transparent sheet in front of their monitors they still are not following the correct procedures that has to be followed to avoid the harmful electronic charge being constantly emitted from the front of the computer monitor?

Every monitor screen that has to be hanged in front of the monitor should be made out of a blackish toned glass that is made with a thin mixture of a graphite material, this material as perhaps in combination of, lead material, is usually coated both at the back of the crt picture tube as well as inside of the external plastic or otherwise casing (body) of your TV and monitor. This graphite with lead blocks the X-ray flow and is a strong resistance when it comes to harmful radiations.

But the basic rule of placing the electronic charge retainable glass sheet is to also have it connected with a common ground (earth) of the computer in use. This is achieved by strongly clipping on a metal clip at one side on the glass sheet; this metal clip that ‘grips’ on both sides of the glass sheet (hanging in front of your monitor) is connected to the metal body of your computer casing through a thin wire. The end connection of this wire on glass sheet as well as on the metal body of your computer must be strong enough, so that the electric charge that is thrown onto the surface of the front glass sheet is instantly EARTHED because of the metal clip and wire.


Only way to prevent ones face turning black while working with a computer is explained as follows.

According to my understanding there should be a front screen (that is supposed to be hanging) for the prevention of electronic charge that is thrown out of the front of the picture tube of your monitor, made out of two thin glass sheets filled with the Liquid Crystal (liquid that is filled inside the display of the LCD display of your non-crt computer display screens.) This liquid crystal is actually a liquid that also is filled inside of your wrist watch’s display that usually displays blackish digits as well as calculator’s displays.

The reason of having a liquid hanging in front of the CRT screen is to block the flow out of sub-atomic particles that are the basic cause of one’s face and skin turning grayish and blackish.

Since such a screen may not be available, therefore, an alternative was thought, and a [[[transparent sylofeen sheet]]] was selected as an effective alternative, that can and should be pasted at the front end on the front screen that you hang for protection, since, if pasted at the inner side of the front screen then the electronic charge which is supposed to settle on the glass sheet may not be able to discharge itself through the conductive wire leading towards the metal body of your computer.

If you purchase a product that is sealed in a box then the card board box is usually nicely sealed with a transparent sheet that is neither a polyethylene material nor is some other plastic sheet, but, instead, is made out of a material that comes in at least two different types. One is sealable with heat another one is sealable with water soluble gum. This is not confirmed though, but the sylofeen sheet transparent without a color init does have a property that if you’ll touch it with a wet finger it will melt a little, but the one that is not water soluble may not have an effect on it if a wet finger is touched.

These sheets can be obtained from those shops, where paper material both for packing and for making paper decorations is sold. A shop selling materials for artists and painters might also be selling sellofeen transparent sheets water soluble in nature.

Within a week or so you’ll notice the original color of your skin, which of course can be again turned dark and grayish, if the sylofeen sheet is removed.



Written by:

Shahzada adnan majeed

Email address: prisms_inverted@yahoo.com


(Space represents an under-root)

there is another reason for your facial color change, as described in one of my earlier messages, where you’ll have to correct the ’’inside’’ colors from within the Group Policy Editor.

.

flag objectionable content

most intel mother boards, come LAN ready. one that i have, has, Pro100/1000 cable ready.

for past more than three years, the thought never occured, that i should download the needed softwares for built-in LAN from http://www.intel.com/

fortunately, intel (sometimes) do put on the not-supported further more, mother-boards pages for user’s ease.

inthere i did managed to download, four or five different, needed softwares for the PRO100/1000 LAN.

knowing that i do not have broad-band cable avilable, after loading the PRO100/1000 softwares, and then configuring them as their windows showed up, in the device manager’s (network adaptors) list as well as in the fire-wall windows as additional stuff for LAN/CABLE. i then even though have dial-up V92 U.S. Robotics modem, the speed, then went to atleast the twice as much, and the accuracy of down-loaded data and the movement of moving video style images went high in quality and made it look like 128Kb/s, as i earlier saw the performance at a nearby net-cafe.

what makes such improvement in the speed, of dial-up modem, becomes clearer than before when you’ll have the ability to configure the most variables with precision when after loading the LAN software from intel.

in many areas still the avilability of high-speed cable or broad-band internet connection are unavilable, and this might bring up the speed twice as much you already have.

i still use the same for ’’all-unassigned’’ address [0.0.0.0/255.255.0.0]

as it is readily accepted.

.

flag objectionable content

With Gandhi family removed from power, world might have a peaceful india for all.

OLAP server, with controlling effect on your mind using your environmental space, effected by the internet canopy even if its in the nearby area. (initial purpose might be different, but microsoft always has multiple puposes for one string of machine language. and its combined routines.)

wanna try, something that shall remove the set suffocation, and might allow you to breath freely ?

In administrative tools/ click on Local Security Policy/ under local policies, click on security options. /network access: remotely accessible registry paths.

in there click on properties, in the list delete the line that has ’’OLAP server’’

but first write it down on a piece of paper if you won’t like it, whhere to put it back so that you may not have a person taunting you,

sub-kuch kharab kardia.

you breathing shall be easy and this shall reveal that the cricket coach was murdered and the U.K. court decision was over turned by italian based indian gandhi people as they said some time ago ’’that they’ll erradicate pakistani coach’’ a criminal by nature, gandhi family could not stop their kid from opening its mouth like a gray-hound.

.Wednesday, 06 June, 2007 04:23:30 PM


Medical Doctor’s Revenge!

Kidney Business, cannot be stopped, until there is alcohol, and meccan set-up exists.

Usually when beyond decimal one on your left takes step forward, bio-biz starts to take its shape like african stalls.

Where male female, animal and other bio objects different, fresh and dried out (preserved) parts are usually sold and offered for as delicious dishes.

Like as if a person might go out for shopping, saying ’’good day ? hello be they name !

couple of fresh male human dicks with half kilo male human balls and teenager female boobs half a dozen in number.

right on mam.
that would be six pence.

and the mom of the house simply covers her gobler, lips painted in white color made out of huge duck out-put.

and said in low tone, um looking at my next day meal.

while, seting up the biz in american soil for hotels and administartive residential villas. The big question, who’s gonna do the meat job for the rich and famous ?

as most have to notice the last couple, what race were they ? nice setup, for the evening meal and teenage school lunch box.

American Jail system’s primary reason was, the delicious sweet taste of fresh human meat slightly boiled salt and pepper, doctor’s mid day meal for human anti-bodies to take over the patient’s body and cure and find out what happened.

Here, your chicken snadwich, gal.

I had my lunch at the medical school, she said.

o really ?

what was it.

the boy killed in road accident.

my goodness.

what ?

i had to cut him open,

jesus.

mom. you said you should be a medical doctor, or THEY are gonna kill both of us.

i didn’t know you had to slaughter your boy friend ?

huh.

he was better than the sick ass that keeps me waiting for the climax.

what’s that ?

i therefore had a big bite on the one i saw. with both balls and the lots of slamis.

you mean you got married in your gut with the big dick of the town ?

hnmmm.

shish.. old style orthadox with no luck to find out what happens inside the church at certain given times with lots of cries and a huge devilish grlllll type of noise. when birds at ’’sham’’ run for their live towards the other ends.

had to call on her distant friend, she was a retired lady from near by pizza corner.

emerging lady doctor, thought for a while, let me find out when he’s gonna fall would it be worth a sandwich or should i get my ice-box ready ?

i’ll be there i a mo hun.

strip she said and with slight fear ... trouser’s already loose at the waist dropped as if hired by the u.s. senate red-indian staff for human-meat processing usually gets the clean and innocents ass shipped out from back door of american well managed jail and penetentury system directed under secure supposed to be carrying ice-cream trucks towards the out of the city towns never accessiable by even the most highest authority of the region. america is no doubt with full verifiable authorization just like that.

my poor baby, she said in slight anger,

and he simply in fast motion said, i thank god, they are not that large for your expanded gut that you had for from my elder brothers thighs.

waaht ?

my father’s toilet bowl cleaner’s gutter slit remover found out about your conduct from the medical college you live your half life at.

your department is sort of shy at your excessive thirst for fresh blood mixed with non-alcoholic apple drink.

come off of it. i wanted to compare the tubes of your nozzle with the one i’m gonna drop down on your fathers dinning table’s main course bowl.

you mean the one with lots of red colored stuff with five litres of lard in it ?

just like i’m gonna pour down some thick discarded engiine oil of my pentium motor-bike in your ass, he said in force ful tone, and up he buckled the strap, feel free to have my ass when i’ll drop at your fatima medical college’s main gate.

City of Lahore, with pakistan’s administartion with well planned few previously selected and suggested by other big fish doctors counted number of kidney business cases, and then the kidney transplant process was subjected to final closure.

a true revenge by filthy minded with criminal profession of medical field, then went on with an attached water bottle filler’s business uplift for to sell out the stored bottles not being accepted my masses.

nestle’s water bottles went low in number and dark blue lables took over.

i simply said in my head, perhaps no we have to consume toilet mixed with wasa’a water supply, and then with kidney doctors, the heavy constant supply of chlorine was added with tap water supply. the result just like as if the toilet was mixed with tap water, for few days and then i was astonished, that why my kidneys have started to make heavy alert.
it wasn’t several weeks non-availability of food of whatever type, but the constant chlorine addition with the tap water.

a common method of making the kidney drugs leave the medical stores shelves. and perhaps later some degradation of permanent kidney function in a given controlled area.

normally, chlorine burst attacks have to be made with few days interval, rather than with such continuty.

samanabad lahore, a constant under the strict criminal activity being regulated by the city authorities.

a little laugh by the passing by governer, saying, their should not be that much polution in the city as his face has turned pitch black when he passes just by chance early in the morning while he leaves for the nearby office.

i’d rather remember general mossa’s distant cross of the balck car heading towards the river ravi bridge.

and couple of times cross of ayub khan’s distant peek at some cathedral’s kids with ice-sicles on the blazer, that i would pick and swallow. as the fog was cleaner then and the omni-bus’s dark thick deasel burst out was just to make my frozeen tiny hands make a strong grip at the handle, with british hercules engraving in the center.

later, the cycles were such that my chin had a strong blow out, as the metal produced by the local manufacturer simply gave up.

we donot buy pakistani products, except water and toilet.

you guys having fun with bottled water ?

good to hear that, as most are with additive chemicals no doubt. so either ways it the dangerous land with american
Drug Enforcing Agency fucking up the entire country.

Miamai Vice, perhaps just a movie, became a reason to explain, why americans are human meat consumers.

when a person simply says, a dirty sick cat, black and white made a huge shit at the inside gate of our house.

moment i just went out to have a peek at the tree with no luck for the lemons, that might give me some strength, i saw a huge cat shit with exactly the same color scheme as the women with clothes handing over some documents to vatican’s POP.

the shit came out first or the pape’ ?

shit fell down by choice or error ?

perhaps our janitor with almost facial figure of H.R.H. Queen Elizabeth from the old pakhi tatti (meaning old shit or old woman) could explain, the start of the human race on planet earth.

the shit dropped first and i had to close and shut my doors of sealed with strong scotch tape to prevent anti-body attacks.

there’s no respect for those royals who become the reason of repeated destruction of those who thought for black n white with slaughtered white man for the evening christian dinner, our lord in heaven and so on and so forth.

no doubt christiany represents something that is not their for all. the game is over as the lie of the vetican the church started before the indian sub-continent, in 14th century, the data sahab’s grave i reckon was some nine hundred years old, and the ’’moree gate’ from where the entire city drainage used to go out for the rest as copied by those who designed the golden gate bridge simply says, moment you click onto the black and red ads on yahoo, along comes the golden gate bridge’s gay world’s attack, so i’d rather stay with the link up there, for ’’her to choose the best live video spot presentation, where there are no video cams, but the upper limit’s start beyond the electronic range.

hard it is to say how i am gonna save my self, easy it for some to say you made more enemies than friends, how can one say, to save the sphere, one had to be smart and logical.
enemies or no friends. i’d rather stay within the limits of my friends body.

feel hungry ? no i can live on you, but the leason that one must not forget.

never loose your cleansing material for the food.

france has better product than black head shampoo that looked like the cat shit out side my house’s gate like the color scheme of the pakistani woman for the vatican.

i really do believe, the reason for sttopage of my food’s money was because it was being sent from europe by the underground ring member, shahzada imran shuja.

thank god i was saved from cat shit stuff.

flag objectionable content